TV Tuning & Setup in Portsea, VIC 3944
Missing channels, duplicates or a new TV that won't find anything? We tune and set up TVs in Portsea, and check the signal while we're there.
Rated 5.0 on GoogleThanks — we'll call you shortly.
Within 30 minutes during opening hours. Need it faster? Call 0497 098 109.
Tuning problems we fix in Portsea
New TVs need more than a channel scan: picture settings, sound, streaming apps and set-top boxes. We set it all up and show you how it works.
Portsea at a glance
Mt Dandenong: 77 km at 46° (north-east), VHF horizontal. Most likely: a long-range high-gain VHF/UHF combination antenna on a tall, guyed mast, with a masthead amplifier only if the meter calls for one.
What lies between Portsea and Mt Dandenong
Draw a line from Portsea toward Mt Dandenong at 46° and it crosses Aspendale, Waterways, Noble Park, Rowville and Ferntree Gully before reaching the transmitter 77 km away.
The compass bearing (46°) is where we start. The final aim comes from the meter, which shows the strongest, cleanest lock on every channel.
What salt air does to antennas in Portsea
Sea breezes in Portsea also mean fatigue. Elements that vibrate in constant wind work loose at the boom. A slight rattle on a windy day is often the first sign an antenna is on the way out.
What we do
1. Meter the outlets
Confirms whether the signal or the TV is the problem.
2. Sort duplicates
Each network from the best source.
3. Show you how
Remote, inputs and channel list.
Portsea prices, upfront
Every Portsea job is priced before it starts. Repairs from $98; call-out waived when you go ahead; $120 saved on any new antenna install; discounts for pensioners, seniors and DVA card holders.
Our services in Portsea
Fixed price before we start, same-day where possible, 25-year warranty on new antennas.
Before you book in Portsea
Can you set up my new smart TV?
Yes — tuning, picture and sound, streaming apps and any set-top box or soundbar.
How long does it take?
Usually under an hour for a couple of TVs.
Is it worth calling someone just to retune?
If you have tried a rescan and it did not work, yes — there is usually an underlying cause we can find with a meter.