TV Antenna Installation & Repair in Carlton, VIC 3053
Carlton sits 34 km from Mt Dandenong, so the signal arriving here is strong — the trouble is what it bounces off on the way in. We fix multipath, tired MATV systems and old terrace cabling.
Rated 5.0 on GoogleThanks — we'll call you shortly.
Within 30 minutes during opening hours. Need it faster? Call 0497 098 109.
Why reception breaks up in Carlton
Carlton sits 34 km from Mt Dandenong and 2.3 km from the CBD repeater. Because both options deliver plenty of signal here, the choice comes down to which arrives cleaner at your roof — not which is closer.
Carlton reception data
- Main transmitter
- Mt Dandenong
- Distance & direction
- 34 km, bearing 97° (east)
- Band & polarisation
- VHF, horizontal
- Channels
- VHF 6, 7, 8, 11 and 12 (plus UHF 32 for C31)
- Local repeater in reach
- Melbourne inner-city repeater (Bourke Place): 2.3 km at 211° (south-south-west), UHF vertical, 270 W
- What we usually fit
- A mid-gain VHF/UHF combination antenna on a short mast above the roofline — or, where the CBD repeater meters cleaner, a UHF antenna mounted vertically and aimed at it
These figures come from ACMA site data and Carlton's coordinates. Terrain and buildings change the picture street by street, which is why every job starts with a meter reading.
Carlton to Mt Dandenong: the path
Signal from Mt Dandenong travels 34 km to reach Carlton, passing over Collingwood (1.6 km out), Deepdene (8.8 km out), Mont Albert North (13 km out), Laburnum (16 km out), Mitcham (20 km out) and Ringwood East (25 km out) on the way.
The shorter path to the CBD repeater (2.3 km at 211°) runs over Melbourne.
The compass bearing (97°) is where we start. The final aim comes from the meter, which shows the strongest, cleanest lock on every channel.
Shared antenna systems around Carlton
In Carlton blocks, the antenna on the roof is often fine and the fault sits somewhere in the building: a corroded tap-off on one floor, an amplifier overdriving the system, or a renovation that cut a cable in the wall. We trace it floor by floor with a meter and write up what we found for the strata manager.
Faults we fix most in Carlton
- Multipath reflections from nearby towers causing blocky pictures on one or two channels
- Renovations that cut or crushed the TV cable inside a wall
- Too many TV points on an unpowered splitter
Reception next door to Carlton
- Fitzroy — 1.0 km to the east, 0.9 km closer to Mt Dandenong.
- Carlton North — 1.1 km to the north-north-east, about the same distance from Mt Dandenong.
- Collingwood — 1.6 km to the east, 1.6 km closer to Mt Dandenong.
- Princes Hill — 1.6 km to the north, 0.5 km further from Mt Dandenong.
Other localities in 3053: Carlton South.
Pricing for Carlton jobs
How much in Carlton? It depends on the fault, so we meter first and then give you one fixed figure. Repairs start at $98, call-out is free with the repair, new antennas come with $120 off the install and a 25-year warranty.
Questions from Carlton customers
My unit in Carlton lost channels but my neighbour is fine — why?
If only your unit is affected, the fault is usually between the riser and your TV: the wall plate, the fly lead, a splitter inside the unit, or the TV's own tuner. If the whole building loses channels at once, it is the shared amplifier or its power supply. We test both and tell you — and the strata manager — which it is.
Do you work with strata managers and real estate agents?
Yes. We regularly report MATV faults to owners corporations and property managers in and around Carlton, with photos and meter readings, and quote at a fixed price before any work.
Why is my Carlton signal strong but the picture still breaks up?
Strength is not quality. Reflections and electrical noise can give a high level with too many errors to decode. We measure the error rate as well as the level, and fix the cause rather than adding gain.